Free Engineering Tools · 3 calculators

Special Hazard Suppression Calculators

Quantity calculations for gaseous agent and foam systems, following the NFPA standard for each agent.

  • Each tool follows a published NFPA standard or code
  • Free, runs in your browser; your inputs stay on your device
  • Screening tool, not reviewed or sealed by a licensed engineer
  • Last updated October 2026

About Special Hazard Suppression Calculators

Special hazard systems are sized from the protected volume or area, the design concentration or application rate, and the losses the enclosure allows. These calculators follow NFPA 12 for carbon dioxide, NFPA 2001 for clean agents and NFPA 11 for foam.

Listed systems carry their own design manuals, and the manufacturer’s flow calculation governs the final design. Use these tools for early quantity estimates and for checking submittals.

Other categories

Engineering aid only, provided as is and without warranty. Results depend on the inputs and on the simplifying assumptions of the method summarized on each tool page, and DGA has not verified them for your application. They do not replace code-required design, testing or review by the licensed engineer responsible for the project. Use of the tools is subject to the Terms of Use.

Quick inquiry

Need these results reviewed for a submittal?

Your name, a way to reach you, and where the project is. One of our licensed PEs replies within one business day. Every inquiry is confidential.

Prefer to describe it first? Open the Project Desk