Free Engineering Tools · 9 calculators
Water Supply and Hydraulics Calculators
Calculators for the water side of fire protection: what the main can deliver, what the pump has to add, and what the piping loses on the way to the system.
- Each tool follows a published NFPA standard or code
- Free, runs in your browser; your inputs stay on your device
- Screening tool, not reviewed or sealed by a licensed engineer
- Last updated October 2026
The Calculators
About Water Supply and Hydraulics Calculators
Every water-based fire protection design starts with the same question: can the supply deliver the system demand, at the required pressure, for the required time? These calculators cover the steps of that check, from the hydrant flow test that defines the supply, through friction loss in the piping, to the fire pump that makes up any shortfall.
Each tool follows the NFPA standard that governs the method, such as NFPA 291 for flow tests, NFPA 20 and NFPA 25 for fire pumps and NFPA 13 for sprinkler hydraulics, and names the edition and section it uses.
Other categories
Sprinkler System DesignSpecial Hazard SuppressionFire Dynamics and DetectionSmoke Control and TenabilityEgress and Occupant LoadStructural Fire ResistanceFlammable Liquids, Gases and RadiationReference Data and ConversionsAll calculators
Engineering aid only, provided as is and without warranty. Results depend on the inputs and on the simplifying assumptions of the method summarized on each tool page, and DGA has not verified them for your application. They do not replace code-required design, testing or review by the licensed engineer responsible for the project. Use of the tools is subject to the Terms of Use.