Free Engineering Tools · 4 calculators
Sprinkler System Design Calculators
Calculators for the checks a sprinkler designer runs between the hazard classification and the hydraulic program: flows at the heads, the design area demand, and the supports that hold the piping.
- Each tool follows a published NFPA standard or code
- Free, runs in your browser; your inputs stay on your device
- Screening tool, not reviewed or sealed by a licensed engineer
- Last updated October 2026
The Calculators
About Sprinkler System Design Calculators
These tools cover the hand calculations of NFPA 13 design: the flow from a sprinkler at a given pressure, the number of sprinklers in the design area and the resulting demand, and the structural checks for hangers and seismic braces.
They are meant for quick checks and early sizing. A full design still needs a complete hydraulic calculation of every flowing sprinkler, pipe and fitting, balanced against the water supply.
Other categories
Water Supply and HydraulicsSpecial Hazard SuppressionFire Dynamics and DetectionSmoke Control and TenabilityEgress and Occupant LoadStructural Fire ResistanceFlammable Liquids, Gases and RadiationReference Data and ConversionsAll calculators
Engineering aid only, provided as is and without warranty. Results depend on the inputs and on the simplifying assumptions of the method summarized on each tool page, and DGA has not verified them for your application. They do not replace code-required design, testing or review by the licensed engineer responsible for the project. Use of the tools is subject to the Terms of Use.