High-piled storage · DGA Fire Protection Engineering
High-piled storage permits and reviews
Commodity classification, storage plans and sprinkler checks for warehouses, sealed by a licensed PE for the fire marshal, the FDNY or your insurer.
Licensed PE in NY, NJ, PA, MD, DE, WA, OR, FL · Reply within one business day · Written scope and fee before work starts
Get a written scope and fee
Received
Thank you. Your request is with a licensed engineer. You will hear back within one business day with a written scope and fee. If it is urgent, call (646) 355-8274.
Sound familiar?
- The fire marshal or FDNY asked for a high-piled storage permit.
- New racks or taller storage.
- An insurer recommendation.
- A change in what you store: plastics, aerosols, tires or batteries.
What you get
- Commodity classification: what your products count as under the fire code.
- A high-piled storage plan.
- A sprinkler adequacy review against the storage.
- The permit package.
- A sealed report.
How it works
- 01Send it
Use the form, upload what you have, or call. A short description is enough to start.
- 02Get a written scope and fee
An engineer reads it and replies within one business day with the scope, the fee and a written delivery date.
- 03We deliver and seal
A licensed PE does the work, seals it and answers the reviewer’s comments.
Reviews and recent work
“I have worked with John for 8 years, and now with his team at DGA. They are knowledgeable, responsive and among the best fire protection engineers I have ever met. I have never worked with a firm that knows all facets of fire protection the way DGA does.”
Stephen S., PE · Engineering firm principal
“The sequence of operations was thorough, they were on-site for the integrated testing and worked through every deficiency with our controls contractor until it all passed.”
Sabrina S. · Smoke control design and commissioning, medical office building
“They were responsive, explained the code issues in plain language, and turned around stamped drawings on schedule.”
Layla · Sprinkler design and hydraulic analysis, warehouse
Licensed PE in New York, New Jersey, Pennsylvania, Maryland, Delaware, Washington, Oregon and Florida.
- Home improvement store · New Jersey
High-piled storage permit drawings.
- Warehouse · Pennsylvania
Commodity classification and sprinkler review for a speculative warehouse.
- Distribution center · Washington
ESFR sprinkler design for a distribution center with a mezzanine pick module.
- Warehouse club · Florida
Rack storage sprinkler review.
Questions
What does it cost?
We send a written fee after we see the scope. Most jobs are a fixed fee. Sending your request and getting the fee costs nothing, with no obligation.
How long does it take?
Your written scope gives a delivery date for our work. Review time at the AHJ, the official who approves your plans, is set by that office, and we tell you what to expect there.
Who approves it?
The AHJ: the building department, fire marshal or fire code official for the address, or your insurer when the request comes from them. We write to what that reviewer requires and answer its comments.
Do you install?
No. DGA Fire Protection Engineering does engineering only. Your contractor installs; we design, review, seal and answer the reviewer.
What should I send?
The notice or insurer letter, a few photos of the racks, and what you store. Rack and sprinkler drawings help if you have them.
Send the notice or rack photos
A licensed engineer replies within one business day with a written scope and fee. Or call (646) 355-8274.
Received
Thank you. Your request is with a licensed engineer. You will hear back within one business day with a written scope and fee. If it is urgent, call (646) 355-8274.
High-piled storage fire protection consulting
Warehouses and distribution centers are among the most challenging fire protection projects, with commodity classification, storage height, aisle widths, and sprinkler design criteria interacting in ways that make high-piled storage one of the most commonly mis-designed and most heavily scrutinized occupancies. DGA Fire Protection Engineering provides fire protection consulting for high-piled storage, warehouses, and distribution facilities across New York, New Jersey, Pennsylvania, Maryland, Delaware, Washington, Oregon, and Florida, from commodity classification through sprinkler design criteria and the high-piled storage permit under IFC Chapter 32.

What’s Included
What high-piled storage fire protection consulting includes
DGA provides fire protection consulting for high-piled storage, warehouses, and distribution facilities across New York, New Jersey, Pennsylvania, Maryland, Delaware, Washington, Oregon, and Florida. DGA takes each project from commodity classification through ESFR or in-rack sprinkler design criteria and the high-piled storage permit, so the storage occupancy is protected and compliant.
Commodity classification
Proper classification of stored materials, the foundation every storage design rests on.
Sprinkler design criteria
Design densities, sprinkler selection (including ESFR and in-rack), and hydraulic demands for storage occupancies.
High-piled storage permits
DGA helps you obtain the permits your AHJ requires, preparing the permit documentation, writing out what is needed, and seeing it through to approval.
Rack storage layouts
Review of rack configurations against sprinkler protection requirements.
AHJ coordination
Direct work with reviewers on storage-specific questions, which are among the most common sources of plan review comments.
ESFR feasibility
Whether an existing warehouse can take ESFR sprinklers, and what the roof, water supply, and storage arrangement need to look like first.
When It Applies
When high-piled storage fire protection consulting applies
Triggers
When you need it
- Warehouses & Distribution Centers: Storage above 12 feet, or above 6 feet for high-hazard commodities, that falls under IFC Chapter 32.
- Commodity Changes: Moving to Class IV, Group A plastics, or aerosols, which requires the existing protection to be re-evaluated.
- Rack Reconfigurations: New high-density racking, catwalks, solid shelving, or automated storage and retrieval systems (ASRS).
- AHJ & Insurer Requirements: Fire marshal violations or insurer recommendations, including FM Global, on storage protection or water supply.
What We Deliver
Storage engineering & code deliverables
- PE-Stamped High-Piled Storage Reports: Commodity classification, maximum storage heights, clearances, and IFC Chapter 32 compliance.
- ESFR & In-Rack Protection: Evaluating ceiling-only ESFR or control mode specific application (CMSA) protection against in-rack sprinkler options.
- Rack Layout & Flue Space Reviews: Transverse and longitudinal flue spaces, solid vs. wire-mesh decking, and aisle widths.
- Smoke & Heat Removal: Evaluating smoke and heat vents, curtain boards, or mechanical smoke removal where the code requires them.
This work is common on industrial and high-hazard, cold storage and food manufacturing, and retail and shopping center projects.
Process
The consulting process
01
Classify
Site review and commodity classification based on actual storage.
02
Define criteria
Sprinkler design criteria matched to the classification, heights, and arrangement.
03
Document
Design criteria package and permit support documentation.
04
Coordinate
AHJ review support through approval.
FAQ
Frequently asked questions
What counts as high-piled storage?
Generally, storage over 12 feet in height, with lower thresholds for certain high-hazard commodities. The exact triggers are in the IFC and NFPA 13, and the firm confirms what applies to the client’s facility.
What if the facility changes what it stores?
A redesign may be needed. Commodity classification drives the entire protection scheme, and if the new commodities are a higher hazard class, the existing system may no longer be adequate. The firm evaluates the change and reports its findings plainly.
Does the firm work with ESFR and in-rack sprinklers?
Yes, including the design criteria and obstruction rules specific to each.
Which states are you licensed in?
New York, New Jersey, Pennsylvania, Maryland, Delaware, Washington, Oregon, and Florida. Each project is sealed by a Professional Engineer licensed in the state where it is located.
Do I need a high-piled storage permit?
Under the International Fire Code, an operational permit is generally required once a high-piled storage area exceeds 500 square feet. High-piled means combustible storage above 12 feet, and the fire code official can apply a 6-foot threshold to high-hazard commodities such as Group A plastics. Local amendments vary, so DGA confirms the requirement with the fire code official.
Accurately identifying stored goods is the cornerstone of system adequacy. Read the technical breakdown on NFPA 13 commodity classification and Group A plastics → to understand how packaging and pallet materials change your hazard category.
From the Technical Library
Related Services
Related services
Also see FM Global Compliance for insurer recommendations under FM Global Data Sheet 8-9.

Fire protection engineering design
Integrated sprinkler, alarm, and hydraulic design for new and existing buildings.

Smoke control system design & testing
Smoke control design, analysis, and acceptance testing.

Sprinkler shop drawings & hydraulic calculations
Sprinkler shop drawings and hydraulic calculations for installation.